View AME8803OEEYY_7111828.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ame 1 ame8803 / 8814 300ma cmos ldo rev.i.02 n typical application n functional block diagram l very low dropout voltage l guaranteed 300ma output l accurate to within 1.5% l 30 m a quiescent current l over-temperature shutdown l current limiting l short circuit current fold-back l noise reduction bypass capacitor l power good detector l power-saving shutdown mode l space-saving sot-26 l factory pre-set output voltages l low temperature coefficient the ame8803/8814 family of positive, linear regulators feature low quiescent current (30 m a typ.) with low drop- out voltage, making them ideal for battery applications. the space-saving sot-26 package is attractive for "pocket" and "hand held" applications. these rugged devices have both thermal shutdown, and current fold-back to prevent device failure under the "worst" of operating conditions. an additional feature is a "power good" detector, which pulls low when the output is out of regulation. in applica- tions requiring a low noise, regulated supply, place a 1000pf capacitor between bypass and ground. the ame8803/8814 is stable with an output capaci- tance of 2.2 m f or greater. l instrumentation l portable electronics l wireless devices l cordless phones l pc peripherals l battery powered widgets l electronic scales n general description n features n applications gnd out in pg overcurrent shutdown thermal shutdown en v ref =1.215v v ref x90% v ref x110% amp r1 r2 byp ame8803 out in c3 2.2 m f c1 1 m f gnd pg 5v out byp en c2 1000pf in l all ame' s lead free products meet rohs standards
ame 2 300ma cmos ldo ame8803 / 8814 rev.i.02 n ordering information n pin configuration ame 8803 1. v in 2. gnd 3. en 4. pg 5. byp 6. v out * die attach: non-conductive epoxy sot-26 top view sot-26 top view ame 8814 1. en 2. gnd 3. byp 4. v out 5. gnd 6. v in * die attach: conductive epoxy 1 3 2 6 4 5 ame8814 1 3 2 6 4 5 ame8803 ame8814 x x x x x operating ambienttemperature range number of pins package type product grade or option special feature ame8803 x x x x x a: 3.3v 1: 1.3v e: -40 o c to +85 o c e: sot-2x y: 6 l: low profile b: 3.0v 2: 2.0v y: lead free & low profile c: 2.8v 3: 4.2v z: lead free d: 2.5v 4: 4.0v e: 3.8v f: 3.6v g: 3.5v h: 2.7v i: 3.4v j: 2.85v k: 3.7v l: 1.5v m: 1.8v n: 2.9v o: 3.1v p: 4.1v q: 4.75v r: 2.65v s: 5.0v u: 3.2v v: 3.15v w: 2.3v y: 1.9v z: 1.7v product grade or option special feature operating ambient temperature range package type number of pins
ame 3 ame8803 / 8814 300ma cmos ldo rev.i.02 n ordering information note: ww represents the date code and pls refer to date code rule before package dimension. * a line on top of the first character represents lead free plating such as aap please consult ame sales office or authorized rep./distributor for output voltage and package type availability. part number marking* output voltage package operating ambient temperature range ame8803aeey aapww 3.3v sot-26 - 40 o c to +85 o c ame8803aeeyl aapww 3.3v tsot-26 - 40 o c to +85 o c ame8803aeeyy aapww 3.3v tsot-26 - 40 o c to +85 o c ame8803aeeyz aapww 3.3v sot-26 - 40 o c to +85 o c ame8803beey aaqww 3.0v sot-26 - 40 o c to +85 o c ame8803beeyl aaqww 3.0v tsot-26 - 40 o c to +85 o c ame8803beeyy aaqww 3.0v tsot-26 - 40 o c to +85 o c ame8803beeyz aaqww 3.0v sot-26 - 40 o c to +85 o c ame8803ceey aarww 2.8v sot-26 - 40 o c to +85 o c ame8803ceey l aarww 2.8v tsot-26 - 40 o c to +85 o c ame8803ceey y aarww 2.8v tsot-26 - 40 o c to +85 o c ame8803ceey z aarww 2.8v sot-26 - 40 o c to +85 o c ame8803deey aasww 2.5v sot-26 - 40 o c to +85 o c ame8803deeyl aasww 2.5v tsot-26 - 40 o c to +85 o c ame8803deeyy aasww 2.5v tsot-26 - 40 o c to +85 o c ame8803deeyz aasww 2.5v sot-26 - 40 o c to +85 o c ame8803eeey aatww 3.8v sot-26 - 40 o c to +85 o c ame8803eeeyl aatww 3.8v tsot-26 - 40 o c to +85 o c ame8803eeeyy aatww 3.8v tsot-26 - 40 o c to +85 o c ame8803eeeyz aatww 3.8v sot-26 - 40 o c to +85 o c ame8803feey abqww 3.6v sot-26 - 40 o c to +85 o c ame8803feeyl abqww 3.6v tsot-26 - 40 o c to +85 o c ame8803feeyy abqww 3.6v tsot-26 - 40 o c to +85 o c ame8803feeyz abqww 3.6v sot-26 - 40 o c to +85 o c
ame 4 300ma cmos ldo ame8803 / 8814 rev.i.02 n ordering information (contd.) part number marking* output voltage package operating ambient temperature range ame8803geey achww 3.5v sot-26 - 40 o c to +85 o c ame8803geeyl achww 3.5v tsot-26 - 40 o c to +85 o c ame8803geeyy achww 3.5v tsot-26 - 40 o c to +85 o c ame8803geeyz achww 3.5v sot-26 - 40 o c to +85 o c ame8803heey agkww 2.7v sot-26 - 40 o c to +85 o c ame8803heey l agkww 2.7v tsot-26 - 40 o c to +85 o c ame8803heey y agkww 2.7v tsot-26 - 40 o c to +85 o c ame8803heey z agkww 2.7v sot-26 - 40 o c to +85 o c ame8803ieey aeqww 3.4v sot-26 - 40 o c to +85 o c ame8803ieeyl aeqww 3.4v tsot-26 - 40 o c to +85 o c ame8803ieeyy aeqww 3.4v tsot-26 - 40 o c to +85 o c ame8803ieeyz aeqww 3.4v sot-26 - 40 o c to +85 o c ame8803jeey agsww 2.85v sot-26 - 40 o c to +85 o c ame8803jeey l agsww 2.85v tsot-26 - 40 o c to +85 o c ame8803jeey y agsww 2.85v tsot-26 - 40 o c to +85 o c ame8803jeey z agsww 2.85v sot-26 - 40 o c to +85 o c ame8803keey ahuww 3.7v sot-26 - 40 o c to +85 o c ame8803keeyl ahuww 3.7v tsot-26 - 40 o c to +85 o c ame8803keeyy ahuww 3.7v tsot-26 - 40 o c to +85 o c ame8803keeyz ahuww 3.7v sot-26 - 40 o c to +85 o c ame8803leey ajkww 1.5v sot-26 - 40 o c to +85 o c ame8803leeyl ajkww 1.5v tsot-26 - 40 o c to +85 o c ame8803leeyy ajkww 1.5v tsot-26 - 40 o c to +85 o c ame8803leeyz ajkww 1.5v sot-26 - 40 o c to +85 o c ame8803meey ajlww 1.8v sot-26 - 40 o c to +85 o c ame8803meeyl ajlww 1.8v tsot-26 - 40 o c to +85 o c ame8803meeyy ajlww 1.8v tsot-26 - 40 o c to +85 o c
ame 5 ame8803 / 8814 300ma cmos ldo rev.i.02 n ordering information (contd.) part number marking* output voltage package operating ambient temperature range ame8803meeyz ajlww 1.8v sot-26 - 40 o c to +85 o c ame8803neey alaww 2.9v sot-26 - 40 o c to +85 o c ame8803neey l alaww 2.9v tsot-26 - 40 o c to +85 o c ame8803neey y alaww 2.9v tsot-26 - 40 o c to +85 o c ame8803neey z alaww 2.9v sot-26 - 40 o c to +85 o c ame8803oeey albww 3.1v sot-26 - 40 o c to +85 o c ame8803oeeyl albww 3.1v tsot-26 - 40 o c to +85 o c AME8803OEEYY albww 3.1v tsot-26 - 40 o c to +85 o c ame8803oeeyz albww 3.1v sot-26 - 40 o c to +85 o c ame8803seey aqzww 5.0v sot-26 - 40 o c to +85 o c ame8803seeyl aqzww 5.0v tsot-26 - 40 o c to +85 o c ame8803seeyy aqzww 5.0v tsot-26 - 40 o c to +85 o c ame8803seeyz aqzww 5.0v sot-26 - 40 o c to +85 o c ame8814aeey aieww 3.3v sot-26 - 40 o c to +85 o c ame8814aeeyl aieww 3.3v tsot-26 - 40 o c to +85 o c ame8814aeeyy aieww 3.3v tsot-26 - 40 o c to +85 o c ame8814aeeyz aieww 3.3v sot-26 - 40 o c to +85 o c ame8814beey aifww 3.0v sot-26 - 40 o c to +85 o c ame8814beeyl aifww 3.0v tsot-26 - 40 o c to +85 o c ame8814beeyy aifww 3.0v tsot-26 - 40 o c to +85 o c ame8814beeyz aifww 3.0v sot-26 - 40 o c to +85 o c ame8814ceey aigww 2.8v sot-26 - 40 o c to +85 o c ame8814ceey l aigww 2.8v tsot-26 - 40 o c to +85 o c ame8814ceey y aigww 2.8v tsot-26 - 40 o c to +85 o c ame8814ceey z aigww 2.8v sot-26 - 40 o c to +85 o c ame8814deey aihww 2.5v sot-26 - 40 o c to +85 o c ame8814deeyl aihww 2.5v tsot-26 - 40 o c to +85 o c
ame 6 300ma cmos ldo ame8803 / 8814 rev.i.02 n ordering information (contd.) part number marking* output voltage package operating ambient temperature range ame8814deeyy aihww 2.5v tsot-26 - 40 o c to +85 o c ame8814deeyz aihww 2.5v sot-26 - 40 o c to +85 o c ame8814eeey aiiww 3.8v sot-26 - 40 o c to +85 o c ame8814eeeyl aiiww 3.8v tsot-26 - 40 o c to +85 o c ame8814eeeyy aiiww 3.8v tsot-26 - 40 o c to +85 o c ame8814eeeyz aiiww 3.8v sot-26 - 40 o c to +85 o c ame8814feey aijww 3.6v sot-26 - 40 o c to +85 o c ame8814feeyl aijww 3.6v tsot-26 - 40 o c to +85 o c ame8814feeyy aijww 3.6v tsot-26 - 40 o c to +85 o c ame8814feeyz aijww 3.6v sot-26 - 40 o c to +85 o c ame8814geey aikww 3.5v sot-26 - 40 o c to +85 o c ame8814geeyl aikww 3.5v tsot-26 - 40 o c to +85 o c ame8814geeyy aikww 3.5v tsot-26 - 40 o c to +85 o c ame8814geeyz aikww 3.5v sot-26 - 40 o c to +85 o c ame8814heey ailww 2.7v sot-26 - 40 o c to +85 o c ame8814heey l ailww 2.7v tsot-26 - 40 o c to +85 o c ame8814heey y ailww 2.7v tsot-26 - 40 o c to +85 o c ame8814heey z ailww 2.7v sot-26 - 40 o c to +85 o c ame8814ieey aimww 3.4v sot-26 - 40 o c to +85 o c ame8814ieeyl aimww 3.4v tsot-26 - 40 o c to +85 o c ame8814ieeyy aimww 3.4v tsot-26 - 40 o c to +85 o c ame8814ieeyz aimww 3.4v sot-26 - 40 o c to +85 o c ame8814jeey ainww 2.85v sot-26 - 40 o c to +85 o c ame8814jeey l ainww 2.85v tsot-26 - 40 o c to +85 o c ame8814jeey y ainww 2.85v tsot-26 - 40 o c to +85 o c ame8814jeey z ainww 2.85v sot-26 - 40 o c to +85 o c ame8814keey aioww 3.7v sot-26 - 40 o c to +85 o c
ame 7 ame8803 / 8814 300ma cmos ldo rev.i.02 n ordering information (contd.) part number marking* output voltage package operating ambient temperature range ame8814keeyl aioww 3.7v tsot-26 - 40 o c to +85 o c ame8814keeyy aioww 3.7v tsot-26 - 40 o c to +85 o c ame8814keeyz aioww 3.7v sot-26 - 40 o c to +85 o c ame8814leey ajdww 1.5v sot-26 - 40 o c to +85 o c ame8814leeyl ajdww 1.5v tsot-26 - 40 o c to +85 o c ame8814leeyy ajdww 1.5v tsot-26 - 40 o c to +85 o c ame8814leeyz ajdww 1.5v sot-26 - 40 o c to +85 o c ame8814meey ajeww 1.8v sot-26 - 40 o c to +85 o c ame8814meeyl ajeww 1.8v tsot-26 - 40 o c to +85 o c ame8814meeyy ajeww 1.8v tsot-26 - 40 o c to +85 o c ame8814meeyz ajeww 1.8v sot-26 - 40 o c to +85 o c ame8814neey akyww 2.9v sot-26 - 40 o c to +85 o c ame8814neey l akyww 2.9v tsot-26 - 40 o c to +85 o c ame8814neey y akyww 2.9v tsot-26 - 40 o c to +85 o c ame8814neey z akyww 2.9v sot-26 - 40 o c to +85 o c ame8814oeey akzww 3.1v sot-26 - 40 o c to +85 o c ame8814oeeyl akzww 3.1v tsot-26 - 40 o c to +85 o c ame8814oeeyy akzww 3.1v tsot-26 - 40 o c to +85 o c ame8814oeeyz akzww 3.1v sot-26 - 40 o c to +85 o c ame8814seey ardww 5.0v sot-26 - 40 o c to +85 o c ame8814seeyl ardww 5.0v tsot-26 - 40 o c to +85 o c ame8814seeyy ardww 5.0v tsot-26 - 40 o c to +85 o c ame8814seeyz ardww 5.0v sot-26 - 40 o c to +85 o c
ame 8 300ma cmos ldo ame8803 / 8814 rev.i.02 n absolute maximum ratings n recommended operating conditions n thermal information caution: stress above the listed absolute maximum rating may cause permanent damage to the device. * hbm b: 2000v~3999v * measure q jc on center of molding compound if ic has no tab. ** mil-std-202g 210f parameter maximum unit input voltage 8 v output current p d / (v in - v o ) ma input, output voltage gnd - 0.3 to v in + 0.3 v esd classification b* parameter package die attach symbol maximum unit conductive epoxy 81 non-conductive epoxy 140 conductive epoxy 260 non-conductive epoxy 280 conductive epoxy 400 non-conductive epoxy 400 150 350 thermal resistance (junction to ambient) internal power dissipation maximum junction temperature solder iron (10 sec)** o c / w sot-26 q ja q jc p d mw o c thermal resistance* (junction to case) parameter symbol rating unit ambient temperature range t a - 40 to +85 o c junction temperature range t j - 40 to +125 o c
ame 9 ame8803 / 8814 300ma cmos ldo rev.i.02 parameter symbol min typ max units input voltage v in note 1 7 v output voltage accuracy v o -1.5 1.5 % 1.2v<=v o(nom) <=2.0v 1300 2.0v1.2v v o <0.8v i o =0ma i o =1ma to 300ma i o =1ma v in =v o +1 to v o +2 test condition i o =1ma % see chart mv v o >1.2v i o =300ma v o =v o(nom) -2.0% n electrical specifications ta = 25 o c unless otherwise noted note1: v in(min) =v out +v dropout note2: to prevent the short circuit current protection feature from being prematurely activated, the input voltage must be applied before a current source load is applied.
ame 10 300ma cmos ldo ame8803 / 8814 rev.i.02 the ame8803/8814 family of cmos regulators con- tain a pmos pass transistor, voltage reference, error am- plifier, over-current protection, thermal shutdown, and power good detection circuitry. the p-channel pass transistor receives data from the error amplifier, over-current shutdown, and thermal pro- tection circuits. during normal operation, the error ampli- fier compares the output voltage to a precision reference. over-current and thermal shutdown circuits become ac- tive when the junction temperature exceeds 150 o c, or the current exceeds 300ma. during thermal shutdown, the output voltage remains low. normal operation is re- stored when the junction temperature drops below 120 o c. the ame8803/8814 switches from voltage mode to cur- rent mode when the load exceeds the rated output cur- rent. this prevents over-stress. the ame8803 also in- corporates current foldback to reduce power dissipation when the output is short circuited. this feature becomes active when the output drops below 0.8volts, and reduces the current flow by 65%. full current is restored when the voltage exceeds 0.8 volts. the enable pin normally floats high. when actively, pulled low, the pmos pass transistor shuts off, and all internal circuits are powered down. in this state, the quiescent current is less than 1 m a. this pin behaves much like an electronic switch. n detailed description n external capacitors n enable n power good the ame8803/8814 is stable with an output capacitor to ground of 2.2 m f or greater. ceramic capacitors have the lowest esr, and will offer the best ac performance. conversely, aluminum electrolytic capacitors exhibit the highest esr, resulting in the poorest ac response. un- fortunately, large value ceramic capacitors are compara- tively expensive. one option is to parallel a 0.1 m f ce- ramic capacitor with a 10 m f aluminum electrolytic. the benefit is low esr, high capacitance, and low overall cost. a second capacitor is recommended between the in- put and ground to stabilize vin. the input capacitor should be at least 0.1 m f to have a beneficial effect. a third capacitor can be connected between the by- pass pin and gnd. this capacitor can be a low cost polyester film variety between the value of 0.001 ~ 0.01 m f. a larger capacitor improves the ac ripple rejec- tion, but also makes the output come up slowly. this "soft" turn-on is desirable in some applications to limit turn-on surges. all capacitors should be placed in close proximity to the pins. a "quiet" ground termination is desirable. this can be achieved with a "star" connection. the ame8803/8814 includes the power good feature. when the output is not within + 15% of the specified volt- age, it pulls low. this can occur under the following con- ditions: 1) input voltage too low. 2) during over-temperature. 3) during over-current. 4) if output is pulled up. (note: pg pin is an open-drain output.)
ame 11 ame8803 / 8814 300ma cmos ldo rev.i.02 ground current vs. input voltage load step (1ma-300ma) chip enable transient response chip enable transient response drop out voltage vs. output voltage drop out voltage vs. load current g r o u n d c u r r e n t ( m a ) input voltage (v) 0 5 10 15 20 25 30 35 40 45 0 1 2 3 4 5 6 7 8 85 o c 25 o c 0 0 time (1ms/div) c l =2 m f r l =10 w o u t p u t ( 1 v / d i v ) e n a b l e ( 2 v / d i v ) 0 0 o u t p u t ( 1 v / d i v ) e n a b l e ( 2 v / d i v ) time (1ms/div) c l =2 m f r l =10 w c byp =1000pf time(20ms/div) c l =2.2 m f c in =2.2 m f output i load 0 i l ( 2 0 0 m a / d i v ) v o ( 5 m v / d i v ) 1200 1000 800 600 400 200 1.3 1.5 2 3 4 output voltage (v) i o =100ma i o =200ma d r o p o u t v o l t a g e ( m v ) 0 i o =300ma 5 1200 1000 800 600 400 200 0 50 100 150 200 250 300 load current (ma) v out =1.3v v out =1.5v v out =1.8v top to bottom v out =2.3v v out =2.5v v out =2.8v v out =3.0v v out =3.3v v out =3.5v d r o p o u t v o l t a g e ( m v ) v out =3.8v v out =4.0v
ame 12 300ma cmos ldo ame8803 / 8814 rev.i.02 power supply rejection ratio short circuit response overtemperature shutdown power supply rejection ratio power supply rejection ratio power supply rejection ratio -80 -70 -60 -50 -40 -30 -20 10 1k 100k 10m p s r r ( d b ) frequency (hz) c l =2.2 m f tantalum c byp =1000pf 100ma 100 m a 1ma 10ma 100ma 100 m a p s r r ( d b ) 100ma 10ma 1ma 100 m a 100ma 100 m a c l =2.2 m f tantalum c byp =0 -80 -70 -60 -50 -40 -30 -20 -10 0 10 1k 100k frequency (hz) 10m p s r r ( d b ) frequency (hz) -80 -70 -60 -50 -40 -30 -20 -10 10 100 1k 10k 100k 1m c l = 10 m f tantalum i l = 100 ma c byp = 0 c byp = 100 p f c byp = 1 nf c byp = 10 nf p s r r ( d b ) frequency (hz) -80 -70 -60 -50 -40 -30 -20 -10 10 100 1k 10k 100k c l = 5.6 m f ceramic i l = 100 ma c byp = 0 c byp = 100 p f c byp = 1 nf c byp = 10 nf r load =100 w r short =0.1 w 0 0 time (2ms/div) v o u t ( 1 v / d i v ) i l o a d ( 4 0 0 m a / d i v ) v o u t ( 1 v / d i v ) i o u t ( 2 0 0 m a / d i v ) time (0.5sec/div) 0 0 r load =6.6 w tantalum
ame 13 ame8803 / 8814 300ma cmos ldo rev.i.02 stability vs. esr vs. i load stability vs. esr vs. i load safe operating area current limit response noise measurement line transient response time (2ms/div) 0 0 v o u t ( 1 v / d i v ) i o u t ( 2 0 0 m a / d i v ) r load =3.3 w time (20ms/div) v o ( 1 m v d i v ) c l =2.2 m f no filter time (2ms/div) v o ( 1 m v / d i v ) v i n ( 1 v / d i v ) v indc =5.0v c l =2.2 m f o u t p u t c u r r e n t ( m a ) input-output voltage differential (v) 10 100 300 0.1 1.0 8.0 sot-23-5 e s r ( w ) iload (ma) 0.01 0.1 1 10 100 1000 10000 0 50 100 150 200 stable region untested region unstable region c l =1 m f iload (ma) e s r ( w ) 0.01 0.1 1 10 100 1000 10000 0 50 100 150 200 stable region untested region unstable region c l =2 m f
ame 14 300ma cmos ldo ame8803 / 8814 rev.i.02 stability vs. esr vs. i load stability vs. esr vs. i load quiescent current vs. temp. load regulation vs. temp. en pin lo bias current vs. temp. shut down current vs. temp. 0.01 0.1 1 10 100 1000 10000 0 50 100 150 200 stable region untested region unstable region iload (ma) e s r ( w ) c l =3 m f 0.001 10000 0.01 0.1 1 10 100 1000 0 50 100 150 200 stable region untested region unstable region c l =10 m f iload (ma) e s r ( w ) 0.40 0.42 0.44 0.46 0.48 0.50 0.52 0.54 0.56 0.58 -45 -5 25 55 85 temperature ( o c) l o a d r e g u l a t i o n ( % ) -0.50 -0.45 -0.40 -0.35 -0.30 -0.25 -0.20 -45 -5 25 55 85 temperature ( o c) e n p i n l o b i a s c u r r e n t ( u a ) 27 28 29 30 31 32 33 34 35 -45 -5 25 55 85 temperature ( o c) q u i e s c e n t c u r r e n t @ 5 v ( u a ) 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 -45 -5 25 55 85 temperature ( o c) s h u t d o w n c u r r e n t ( u a )
ame 15 ame8803 / 8814 300ma cmos ldo rev.i.02 dropout voltage vs. temp. pg vol vs. temp. 0.15 0.20 0.25 0.30 0.35 0.40 0.45 -45 -5 25 55 85 temperature ( o c) p g v o l @ 0 . 4 m a ( v ) 150 160 170 180 190 200 210 220 -45 -5 25 55 85 temperature ( o c) d r o p o u t v o l t a g e @ 3 0 0 m a ( m v )
ame 16 300ma cmos ldo ame8803 / 8814 rev.i.02 package carrier width (w) pitch (p) part per full reel reel size sot-26 8.00.1 mm 4.00.1 mm 3000pcs 1801 mm year a a a w w xxx0 a a a w w xxx1 a a a w w xxx2 a a a w w xxx3 a a a w w xxx4 a a a w w xxx5 a a a w w xxx6 a a a w w xxx7 a a a w w xxx8 a a a w w xxx9 marking date code n date code rule n tape and reel dimension carrier tape, number of components per reel and reel size sot-26 pin 1 w p ame ame
ame 17 ame8803 / 8814 300ma cmos ldo rev.i.02 package carrier width (w) pitch (p) part per full reel reel size tsot-26 8.00.1 mm 4.00.1 mm 3000pcs 1801 mm n tape and reel dimension pin 1 w p ame ame tsot-26 carrier tape, number of components per reel and reel size
ame 18 300ma cmos ldo ame8803 / 8814 rev.i.02 n package dimension sot-26 tsot-26 min max min max a a 1 0.00 0.15 0.0000 0.0059 b 0.30 0.55 0.0118 0.0217 d 2.70 3.10 0.1063 0.1220 e 1.40 1.80 0.0551 0.0709 e h 2.60 3.00 0.10236 0.11811 l q 1 0 o 10 o 0 o 10 o s 1 0.37ref 0.0146ref 0.95ref 0.0374ref 1.90 bsc 0.0748 bsc symbols millimeters inches 1.20ref 0.0472ref side view l c 1 top view s 1 d e e h front view b a a 1 pin 1 side view l c 1 top view s 1 d e e h front view b a a 1 pin 1 min max min max a a 1 0.00 0.15 0.0000 0.0059 b 0.30 0.55 0.0118 0.0217 d 2.70 3.10 0.1063 0.1220 e 1.40 1.80 0.0551 0.0709 e h 2.60 3.00 0.10236 0.11811 l q 1 0 o 10 o 0 o 10 o s 1 1.90 bsc 0.0748 bsc symbols millimeters inches 1.20ref 0.0472ref 0.37ref 0.0146ref 0.95ref 0.0374ref
life support policy: these products of ame, inc. are not authorized for use as critical components in life-support devices or systems, without the express written approval of the president of ame, inc. ame, inc. reserves the right to make changes in the circuitry and specifications of its devices and advises its customers to obtain the latest version of relevant information. ? ame, inc. , november 2008 document: 2006/2095-ds8803/8814-i.02 corporate headquarter ame, inc. 2f, 302 rui-guang road, nei-hu district taipei 114, taiwan. tel: 886 2 2627-8687 fax: 886 2 2659-2989 www.ame.com.tw e-mail: sales@ame.com.tw

▲Up To Search▲

Price & Availability of AME8803OEEYY

	To Download AME8803OEEYY Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .